Selecting An Input Source; Configuring Input 2; Selecting Compact Pc - Barco Solaris LC40 Owner's Manual

7. Input Selection

7.2 Selecting an Input Source

Steps to be taken
1. Scroll through the menu until the desired source is highlighted, e.g. SDI. (menu 7-4)
Note: Input 2 can be configured depending on the input source.
2. Press ENTER to select.
Select input
1. Video
2. RGB
3. S-Video
4. HD-SDI
5. SDI
6. RGB
7. DVI
8. Compact PC
Configure input 2
Configure HD-SDI
Back
Menu 7-4

7.3 Configuring input 2

Steps to be taken
1. Select Configure input 2 and press ENTER. (menu 7-5)
The configuration window will be displayed. (menu 7-6)
2. Select the corresponding input and press ENTER.
Select input
1. Video
2. RGB
3. S-Video
4. HD-SDI/DVI/Audio/RGB
5. SDI
6. RGB
7. DVI
8. Compact PC
Configure input 2
Back
Menu 7-5

7.4 Selecting Compact PC

Overview
When Compact PC is selected, the content of the compact PC will be displayed on the display.
Custom applications running on this PC can now be displayed.
No external connection between the Compact PC and the Solaris LC40 is necessary except for the Ethernet connection when the
internal hub is used. Source connections are connected internally by inserting the compact PC in its docking slot.
40
Configuration Input 2
YUV
SYUV
SRGB
RGsB
BACK
Menu 7-6
R5976672 SOLARIS LC40 01042004