Language Selection; Tiled Setup - Barco Solaris LC40 Owner's Manual

Delay set up
When no signal is Standby [on]:
1. Select Delay. (menu 12-33)
2. Press ENTER to activate.
The delay entering menu appears. (menu 12-34)
The first digit is highlighted.
3. Enter a new delay time with the digit keys on your RCU
Or,
turn the thumb wheel to change the first digit. Press the thumb wheel to enter the selected value and to jump to the next digit.
Handle in the same way for the second digit.
When no signal
Standby : [off]
Delay (min) : 5
Back
Menu 12-33

12.9.3 Language Selection

What can be done ?
The OSD language can be changed to one of the available languages.
How to change the language
1. Select Advanced Settings.
2. Press ENTER to activate.
The Advanced Settings menu will be displayed. (menu 12-35)
3. Select Installation.
4. Press ENTER to activate.
The Installation menu will be displayed. (menu 12-36)
5. Press ENTER to activate.
The language menu will be displayed. (menu 12-37)
The * indicates the actual active language.
6. Select the desired language and press ENTER.
The OSD will change to the selected language.
Advanced Settings
Gamma
Color Temperature
Input Balance
Noise Reduction
Film mode detection [ON]
Video AGC
Display Settings
Installation
Service
Back
Menu 12-35

12.9.4 Tiled setup

This set up has to be done for each tile (display) in the configuration.
R5976672 SOLARIS LC40 01042004
Shutdown delay
Enter new value
05
Menu 12-34
Installation
File Service
When no signal
Language
Tile setup
Back
Menu 12-36
Language
*English
Français
Deutsch
Español
Back
Menu 12-37
12. Advanced Settings
79