Attaching The Safety Restraint Belt - Jungheinrich EKS 314 Operating Manual

2.1

Attaching the safety restraint belt

QwD
Check the safety restraint belt (27) and the eye (25), safety rope (24),
karabiner hooks (23, 26) and attachment point (22) on the overhead guard
daily for wear and damage. If the belt system (23 – 27) is damaged, do not
use the truck under any circumstances. The belt must be immediately
replaced after an accident (catching a person) or if it is damaged or worn.
Any damage must be reported to a supervisor.
All warnings on the belt must be read and observed.
QwD
Attach and fasten the safety restraint belt as soon as you get on the platform
and before starting other work.
– Attach the safety restraint belt (27) to your body.
– Attach the safety rope (24) and karabiner hook (23) to the overhead guard.
– Attach the safety rope (24) and karabiner hook (26) to the eye (25) of the safety
restraint belt (27).
E 8
22
23
24
25
26
27