Attaching The Safety Restraint Belt - Jungheinrich EKS 308 Operating Instructions Manual

o Attaching the safety restraint belt
3.3
F
Carry out a daily inspection of the safety restraint belt (32) and the eye (30), safety
rope (29), karabiner hooks (28, 31) and attachment rail (27) at the front of the
overhead guard, checking for wear and damage. Do not operate the truck under any
circumstances if the safety restraint harness (28 - 32) and the attachment rail (27) at
the front of the overhead guard are damaged.
The safety restraint harness (28-32) must be immediately replaced after an accident
(catching a person) or if it becomes damaged or worn.
Any damage must be reported to a supervisor.
All warnings on the safety restraint harness must be read and observed.
F
Put on the safety restraint belt (32) and secure it through the safety rope (29) to the
front of the overhead guard as soon as you step onto the platform and before starting
other work.
– Attach the safety restraint belt (32) to your body.
– Insert the karabiner hook (28) of the safety rope (29) into the attachment rail (27)
at the front of the overhead guard.
– Attach the karabiner hook (31) of the safety rope (29) to the eye (30) of the safety
restraint belt (32).
30
27
28
29
31
32
E 9