Siemens SITRANS F Series Operating Instructions Manual page 95

Bit Diagnostic
7 Parameter storage malfunction
8 Internal error in sensor
9
10
11
12
13
14 Unstable measurement condition Check if air is present in the liquid and that the flowmeter is operated within
15 Auto filtering
23 The sensor is stabilizing
FC310 (From firmware 4.0)
Operating Instructions, 06/2018, A5E44036384-AA
Action
Turn off the power, wait 5 seconds and turn on the power again. If the failure
continues then contact Siemens customer support
Contact Siemens customer support
its specifications
Check that the flowmeter is operated within its specifications. Check other
alarms to rule out HW malfunction
Turn off the power, wait 5 seconds and turn on the power again. If the failure
continues then contact Siemens customer support.
Parameter assignment
8.2 Alarm messages
95