Commissioning; Installation - Pepperl+Fuchs PSU-IDM160-BD-1D-J1-N0 Series Manual

 C  C
ommIssIonIng ommIssIonIng

4. Commissioning

4.1. Installation

Structure of the power module
1.
The power module is fastened to a stable base using the four mounting holes at the
corners of the base plate
Figure 1. Mounting points for installation
2.
The connections for equipotential bonding (M5 x 10) are located on both the front
and back of the power module
Figure 2. Equipotential bonding connection
14
1 . The holes each have a diameter of 7 mm.
1
.
2
2
WArNINg!
Equipotential bonding must be present for the entire duration
while the intrinsically safe circuits are being established!
1
2