Installing A Common Support; Determining The Installation Position - Huawei SUN2000-30KTL-US User Manual

SUN2000-(25KTL, 30KTL)-US
User Manual
Figure 4-18 Installing an antitheft lock
----End

4.4 Installing a Common Support

4.4.1 Determining the Installation Position

This section uses a normal support as an example to describe how to determine the installation
position.
Basic Requirements




Installation Environment Requirements
The SUN2000 must be installed in a well ventilated environment to ensure good heat
dissipation. When installed under direct sunlight, performance de-rate may be initiated due to
additional temperature rise.
Carrier Requirements


Issue 09 (2019-06-30)
The SUN2000 is protected to Type 4X and can be installed indoors or outdoors.
The installation method and position must be appropriate for the weight and dimensions
of the SUN2000. For details, see
Do not install the SUN2000 in a place where personnel are likely to come into contact
with its enclosure and heat sinks because these parts are extremely hot during operation.
Do not install the SUN2000 in an area that stores flammable or explosive materials.
The carrier where the SUN2000 is installed must be fire-proof.
Do not install the SUN2000 on flammable building materials.
Copyright © Huawei Technologies Co., Ltd.
10 Technical Specifications.
4 Installation
35