Huawei SUN2000-30KTL-US User Manual page 71

SUN2000-(25KTL, 30KTL)-US
User Manual
Use the positive and negative metal terminals and DC connectors supplied with the SUN2000.
Using incompatible positive and negative metal terminals and DC connectors may result in
serious consequences. The caused device damage is not covered under any warranty or
service agreement.
Procedure
Step 1 Prepare positive and negative connectors.



Figure 5-16 Crimping tool (H4TC0003)
(1) Locator
Issue 09 (2019-06-30)
The metal contacts supplied with the DC connectors are either cold forming contacts or
stamping forming contacts. Choose the crimping tools that fit the metal contact types. Do
not mix up the tools.
Crimp the metal cold forming contacts using crimping tool UTXTC0005 (Amphenol,
recommended) or H4TC0001 (Amphenol).
Crimp the metal stamping forming contacts using crimping tool H4TC0003 (Amphenol,
recommended), H4TC0002 (Amphenol), PV-CZM-22100 (Staubli), or PV-CZM-19100
(Staubli). When choosing PV-CZM-22100 or PV-CZM-19100, do not use the locator.
Otherwise, metal contacts would be damaged.
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
64