Installing A Rear Panel - Huawei SUN2000-30KTL-US User Manual

SUN2000-(25KTL, 30KTL)-US
User Manual
Step 2 Lift the SUN2000 from the packing case and move it to the installation position.



----End

4.3.3 Installing a Rear Panel

Prerequisites
Figure 4-8
Figure 4-8 Rear panel dimensions
Procedure
Step 1 Determine the positions for drilling holes (as shown in
available in the packing case, level the hole positions using a level, and mark the hole
positions using a marker.
Issue 09 (2019-06-30)
The SUN2000 is heavy. Arrange at least two persons to carry it. To prevent device damage
and personal injury, keep balance when moving the SUN2000.
Do not place the SUN2000 with its wiring terminals contacting the floor because the
power ports and signal ports at the bottom of the device are not designed to support the
weight of the SUN2000. Place the SUN2000 horizontally.
When placing the SUN2000 on the floor, put foam or paper under the SUN2000 to protect
its enclosure.
shows the dimensions of the rear panel.
Copyright © Huawei Technologies Co., Ltd.
Figure 4-9) using the rear panel
4 Installation
28