SUN2000-(33KTL, 40KTL)
User Manual
Figure 4-8 Moving the SUN2000
Step 2 Carry the SUN2000 out of the packing case and move it to the installation position.
----End
4.3.3 Installing a Rear Panel
Before installing the SUN2000, secure the shipped rear panel to a wall.
Prerequisites
Figure 4-9
Issue 03 (2015-12-01)
To prevent device damage and personal injury, keep balance when moving the SUN2000
which is heavy.
Do not place the SUN2000 with its wiring terminals contacting the floor because the
power ports and signal ports at the bottom of the device are not designed to support the
weight of the SUN2000. Place the SUN2000 horizontally.
When placing the SUN2000 on the floor, put foam or paper under the SUN2000 to protect
its enclosure.
shows the dimensions of the rear panel.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Installation
29