Harmar Mobility AL030 Installation & Owner's Manual page 24

Installation
INStaLLING the hItch aDaPter
1. attach hitch adapter to hitch post
orientated properly according to the
application's Hitch Height. [Figure 24-1]
2. attach hitch Post to lift.
over tighten.
3. Slide hitch adapter into vehicle's
hitch receiver. Fasten Adapter
according to hitch class. [Figure 23-2]
24
Section 2 : inStaller
Do NOT
1/2" Hex 1/2" Hex
Nyloc Nuts Nyloc Nuts
( x3 ) ( x3 )
HHCS, HHCS,
1/2-13 x 1/2-13 x
O R O R
3-1/2" 3-1/2"
( x3 ) ( x3 )
Hardware supplied Hardware supplied
in hardware pack in hardware pack
Figure 24-1