Rosemount 3051S/3051Sfx/3051S-Ers Product Certifications - Emerson Rosemount 3051S-ERS Quick Start Manual

Quick Start Guide
7 Rosemount 3051S/3051SFx/3051S-ERS Product
Certifications
Rev 2.2
European Directive Information
A copy of the EU Declaration of Conformity can be found at the end of the
Quick Start Guide. The most recent revision of the EU Declaration of
Conformity can be found at
Ordinary Location Certification
As standard, the transmitter has been examined and tested to determine that
the design meets the basic electrical, mechanical, and fire protection
requirements by a nationally recognized test laboratory (NRTL) as accredited
by the Federal Occupational Safety and Health Administration (OSHA).
Installing Equipment in North America
The US National Electrical Code
permit the use of Division marked equipment in Zones and Zone marked
equipment in Divisions. The markings must be suitable for the area
classification, gas, and temperature class. This information is clearly defined in
the respective codes.
7.1 USA
7.1.1 E5 US Explosionproof (XP) and Dust-Ignitionproof (DIP)
Certificate FM16US0090
Standards FM Class 3600 - 2011, FM Class 3615 - 2006, FM Class 3616 -
Markings
7.1.2 I5 US Intrinsic Safety (IS) and Nonincendive (NI)
Certificate FM16US0089X
Standards FM Class 3600 - 2011, FM Class 3610 - 2010, FM Class 3611 -
Markings
24
Emerson.com/Rosemount.
2011, FM Class 3810 - 2005, ANSI/NEMA 250 - 2003
XP CL I, DIV 1, GP B, C, D; DIP CL II, DIV 1, GP E, F, G; CL III; T5(–
50 °C ≤ T ≤ +85 °C); Factory Sealed; Type 4X
a
2004, FM Class 3810 - 2005, NEMA
IS CL I, DIV 1, GP A, B, C, D; CL II, DIV 1, GP E, F, G; Class III; Class
1, Zone 0 AEx ia IIC T4; NI CL 1, DIV 2, GP A, B, C, D; T4(–50 °C ≤
T ≤ +70 °C) [HART]; T4(–50 °C ≤ T
a
connected per Rosemount drawing 03151-1006; Type 4X
®
(NEC) and the Canadian Electrical Code (CEC)
®
≤ +60 °C) [Fieldbus]; when
a
February 2019
250 - 2003
Rosemount 3051S