Appendix A
Rosemount
A.1
European Directive information
A copy of the EC Declaration of Conformity can be found at the end of the Quick Start
Guide. The most recent revision of the EC Declaration of Conformity can be found at
Emerson.com/Rosemount.
A.2
Ordinary location certification
As standard, the transmitter has been examined and tested to determine that the design
meets the basic electrical, mechanical, and fire protection requirements by a nationally
recognized test laboratory (NRTL) as accredited by the Federal Occupational Safety and
Health Administration (OSHA).
A.3
Installing equipment in North America
The US National Electrical Code (NEC) and the Canadian Electrical Code (CEC) permit the
use of Division marked equipment in Zones and Zone marked equipment in Divisions. The
marking must be suitable for the area classification, gas, and temperature class. This
information is clearly defined in the respective codes.
A.4
Rosemount
for General Purpose Locations
A.4.1
USA
FM Certificate
Standards
Markings
Special conditions for use
1.
Reference Manual
™
6888 product certifications
™
6888A In-Situ Oxygen Transmitter
FM17NUS0009X
FM 3810:2005, ANSI/IEC-250:2003, ANSI/EC 60529:2004
Type 4X, IP66
Type 4X and IP66 applies to the transmitter portion that is mounted externally to
the flue duct.
™
Rosemount
6888 product certifications
121