Product Identification; Name Plate; Transport And Storage; Inspection - ABB VA Master FAM540 Commissioning Instructions

4

Product identification

4.1

Name plate

NOTE
The power supply, ambient temperature (T
measuring medium temperature T
the name plate must be complied with during
commissioning.
For detailed information on the data indicated on the name
plate, see the associated operating instructions (OI).
26 CI/FAM540-EN Rev. B | VA Master FAM540
) and
amb
) data indicated on
medium
5

Transport and storage

5.1

Inspection

Check the devices immediately after unpacking for possible
damage that may have occurred from improper transport.
Details of any damage that has occurred in transit must be
recorded on the transport documents.
All claims for damages must be submitted to the shipper
without delay and before installation.
5.2

Transport

DANGER
Life-threatening danger due to suspended loads.
In the case of suspended loads, a danger of the load falling
exists.
Remaining under suspended loads is prohibited.
When transporting the device, please note:
— The center of gravity of some devices is not at the center
of the equipment.
— The protection plates or dust caps mounted at the
process connections of devices equipped with PTFE/PFA
may only be removed immediately before installation. To
prevent possible leakage, ensure that the liner on the
flange is not cut or damaged.
— Ensure that small internal parts such as floats or cones do
not fall out and become damaged.
5.3

Returning devices

Please contact Customer Center Service acc. to page 2 for
nearest service location.