Setting The Real Time; Setting The Wake Time - Thermo Scientific Cryostat Microm Cryo-Star HM 560 Instruction Manual

2-12

SETTING THE REAL TIME,

WAKE TIME AND ACTIVE TIME
2-12-1 SETTING THE REAL TIME
• Press button (fig. 47b.2) once.
• To change the instrument's real time at
intervals of one minute, press the UP or
DOWN button (fig. 47d.5 or 47d.6).

2-12-2 SETTING THE WAKE TIME

• Press button (fig. 47b.2) three times.
• To change the WAKE time at intervals of 15
minutes, press the UP or DOWN button (fig.
47d.5 or 47d.6).
After having reached the WAKE time, the
instrument switches over to the active status.
2-12-3 SETTING THE ACTIVE TIME
• Press button (fig. 47b.2) four times.
• To change the ACTIVE time at intervals of
1-hour-steps (1 to 9 h), press the UP or
DOWN button (fig. 47d.5 or 47d.6).
The set ACTIVE time is only valid when the
instrument has left the sleep status after having
reached the START time. Then the set
ACTIVE time will be prolonged whenever
pressing a key or turning the Hand wheel.
Note:
If the ACTIVE time has been
passed and the instrument is in the
sleep status and has been activated
afterwards by the operator, the default value of
1 h is now valid again.
Note:
Further menu steps are relevant for
service technicians only.
40
Thermo Scientific Cryostat Microm Cryo Star HM 560
MICROM International GmbH
Robert-Bosch-Str. 49
D- 69190 Walldorf
387 500 - English
Fig. 46
Fig. 46a