Troubleshooting - Weldex WDP-4602MXV Owner's Instructions Manual

TROUBLESHOOTING

TROUBLESHOOTING
Issue
No power
Unable to connect using a web-
browser
I get disconnected from the live
view
IP Scan Tool cannot find the
network camera
This document contains confidential and proprietary information of Weldex Corporation.
 Check power cable/plug for a proper connection.
 If PoE is being used, check that the cable is properly connected.
Replace the cable if the cable is defective.
 Check network settings.
 Check for a proper network cable connections.
 Confirm that a DHCP server is present in the network if DHCP
mode is used.
 If a router is used, check for correct port forwarding settings.
 The live view will be disconnected if another user makes
changes to the camera settings
 Check for a proper network connection.
 Disable the PC's firewall or add IP Scan Tool to the exceptions
list.
TROUBLE SHOOTING
Recommendation
50