Ip Scan Tool - Weldex WDP-4602MXV Owner's Instructions Manual

IP Scan Tool

IP Scan Tool
After physically connecting the network camera to the network, run the 'IPScan.exe' application on
the software CD. This program will scan for Weldex cameras on the network, regardless of the unit's IP
address. Once you locate a unit, you may change the network settings
Note
Verify that the computer where you will run the 'IPScan.exe' file is on the same network as the
unit you wish to locate. Units on a different network will not appear when running the search
function.
IP Scan Tool Functions
①
⑥
Item
① Search
② IP Setup
③ Web Browser
④ Device Info
⑤ Factory Default
This document contains confidential and proprietary information of Weldex Corporation.
② ③
⑦ ⑧
Searches for the connected Weldex network camera.
View/Edit IP settings for the selected Network Camera (Device ID, IP
address, Subnet mask and Gateway).
Administrator's password is required.
Connects to the selected Network Camera using the default web-
browser.
Displays device info for the selected Network Camera.
Restores factory defaults for the selected Network Camera
Administrator's password is required.
NETWORK INSTALLATION & SETUP
④ ⑤
⑨ ⑩
Functions
17