Video Setup - Weldex WDP-4602MXV Owner's Instructions Manual

Configuration
-
AUDIO & VIDEO
Item
Bit Rate Control
Bit Rate
GOP (Group of Picture)
Quality
Note
Stream1(H.264) is the main stream and it is used for monitoring and local recording.
Stream2(MJPEG) is a sub-stream and it is used for email, FTP, and motion detection setup
pages. Stream2 can also be used for network streaming.

• VIDEO SETUP

Item
Video Output
Live Mirror
OSD
This document contains confidential and proprietary information of Weldex Corporation.
Compression methods: CBR(Constant Bitrate), VBR(Variable Bitrate).
- CBR varies the image quality and outputs a fixed bit rate.
- VBR varies the bit rate and prioritizes image quality.
Amount of data output per second.
The selection range will change depending on the selected resolution.
If VBR is selected, the maximum bitrate that can be configured is
indicated next to the input box.
Key frame insertion interval.
Selectable range: 1~90.
If you increase this value, the data output size will be decreased.
However, in the event of a frame loss, it will take longer for the image
to be restored.
Quality of the MJPEG.
Selectable range: 5~95.
Switch CVBS analog output between NTSC and PAL.
Mirror/Flip the streaming output.
Options: OFF, HORIZONTAL, VERTICAL, HORIZONTAL+VERTICAL
On-Screen-Display that will be embedded to the streaming.
Date/Time and custom text up to 20 characters can be embedded.
Description
Description
WEB Viewer
25