Weldex WDP-4602MXV Owner's Instructions Manual
  1. Manuals
  2. Brands
  3. Weldex Manuals
  4. Digital Camera
  5. WDP-4602MXV
  6. Owner's instructions manual

Weldex WDP-4602MXV Owner's Instructions Manual

2 megapixel ip height strip faceview camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

V.1.0

Advertisement

Table of Contents
loading

Related Manuals for Weldex WDP-4602MXV

Summary of Contents for Weldex WDP-4602MXV

  • Page 1 V.1.0...
  • Page 2 If this document is translated from the original English version by Weldex Corporation, all reasonable endeavors will be used to ensure the accuracy of translation. Weldex Corporation shall not be liable for any translation errors contained herein or for incidental or consequential damages in connection with the furnishing or use of this translated material.

  • Page 3: Table Of Contents

    Network Initial Setup ----------------------------------------------------------------16 IP Scan Tool ----------------------------------------------------------------------------17 VLC Player Installation ---------------------------------------------------------------19 WEB Viewer WEB Viewer Login --------------------------------------------------------------------21 Live View Functions ----------------------------------------------------------------22 Configuration - AUDIO&VIDEO Video Profile ----------------------------------------------------------------24 Video Setup ------------------------------------------------------------------25 This document contains confidential and proprietary information of Weldex Corporation.
  • Page 4 FTP ----------------------------------------------------------------------------37 SMTP -------------------------------------------------------------------------38 SCHEDULE -------------------------------------------------------------------39 MOTION DETECTION ------------------------------------------------------40 SENSOR ----------------------------------------------------------------------42 NETWORK UNLINKED ----------------------------------------------------43 Configuration - SYSTEM INFORMATION --------------------------------------------------------------44 USER --------------------------------------------------------------------------45 DATE/TIME -----------------------------------------------------------------46 MAINTENANCE -------------------------------------------------------------47 LOG ---------------------------------------------------------------------------49 TROUBLESHOOTING Troubleshooting -----------------------------------------------------------------50 This document contains confidential and proprietary information of Weldex Corporation.

  • Page 5: Introduction

    INTRODUCTION This manual provides information on installation and operation of the WDP-4602MXV IP camera. The WDP-4602MXV is a stand alone, non-PC based, fully embedded video codec capable of encoding video and audio from an analog video/audio source in real time.

  • Page 6: Package Contents

    Package Contents INTRODUCTION Package Contents Installation CD 12VDC Power Supply with Power Code (Optional) & Manual Screw IP Camera – WDP-4602MXV Angle Regulators This document contains confidential and proprietary information of Weldex Corporation.

  • Page 7: Specifications

    H.264 streaming over UDP,TCP,HTTP or HTTPS MJPEG streaming over HTTP or HTTPS Video 640x480, 800x480, 800x600, 1024x768, Resolution 1024x720, 1280x1024, 1920x1080 up to 30fps @1080p Frame Rate ⑵ Output NTSC/PAL 1Vp-p 75ohm composite This document contains confidential and proprietary information of Weldex Corporation.
  • Page 8 HTTPS encrypted data transmission Firmware Supports Firmware upgrade Maintenance Dual Booting Support for Firmware Recovery Factory Reset Restores to factory default settings SDK available for application development and Application Application system integration This document contains confidential and proprietary information of Weldex Corporation.
  • Page 9 (2) If PoE and external power are connected at the same time, external power will be used. If external power is removed, it will switch to PoE and vice-versa. The camera might reboot during power switching. This document contains confidential and proprietary information of Weldex Corporation.

  • Page 10: Installation

    Power input port (not needed if PoE is being used) Note (1) Video output connector is used only for installation purposes. It should not be used for recording or surveillance purposes. This document contains confidential and proprietary information of Weldex Corporation.

  • Page 11: Disassembling

    2. Using the screw driver, loosen 4 screws by turning them counterclockwise for Main board. 3. Using the screw driver, loosen 4 screws by turning them counterclockwise for Camera board. 4. Disassemble the IP main harness cables. This document contains confidential and proprietary information of Weldex Corporation.

  • Page 12: Installing The Camera On A Wall

    4. Pass the ethernet and power accessory cables through the hole you want to pass them when mounting the main body on the case. 5. Assemble the Height-Strip Cover [Window Acryl]. 6. Fasten 4 screws by turning top plate clockwise. This document contains confidential and proprietary information of Weldex Corporation.

  • Page 13: Pcb Board Layout Of The Camera

    FPC/FFC 30pin Cable to connect the CMOS Board Factory Reset switch Factory Reset indicator Power Indicator D18/D7 Ethernet Link / Activity indicator Power/Video out/Audio out/Sensor in/Alarm out signals Ethernet/Power over Ethernet signals This document contains confidential and proprietary information of Weldex Corporation.

  • Page 14: Connection Sensor Input And Alarm Output

    Only DC alarm device are supported. If alarm devices 2A or higher are used, an external relay is required. DC Power Supply Camera Alarm device Green wire Power FET Black wire This document contains confidential and proprietary information of Weldex Corporation.

  • Page 15: Dimensions

    Dimension INSTALLATION Dimensions This document contains confidential and proprietary information of Weldex Corporation.

  • Page 16: Network Installation & Setup

    NETWORK INSTALLATION & SETUP NETWORK INSTALLATION & SETUP Network Initial Setup This section describes how to initially set up your Weldex network camera. Initial setup consists of the following series of steps:  Locating the unit on the network  Changing the network settings Initial setup of the unit requires a computer connected to the same network as the unit(s).

  • Page 17: Ip Scan Tool

    After physically connecting the network camera to the network, run the ‘IPScan.exe’ application on the software CD. This program will scan for Weldex cameras on the network, regardless of the unit’s IP address. Once you locate a unit, you may change the network settings Note Verify that the computer where you will run the ‘IPScan.exe’...
  • Page 18 ⑩ Firmware Version Displays firmware version of the camera. Configuring Network Settings Using IP Scan Tool Run ‘IPScan.exe’ executable file and click [Search]. Network connected Weldex cameras will be listed in the window. 1. Select the camera to be configured by clicking on your mouse.

  • Page 19: Vlc Player Installation

    Previous installations of VLC Player should be completely uninstalled from the PC. Weldex uses a customized and proprietary version of VLC Player which requires that all other VLC versions be removed from the PC, even if the installed version is newer than what’s provided by Weldex. 1. Install the ‘vlc-2.0.6-win32- weldex.exe’...
  • Page 20 ‘Compatibility View’ might need to be enabled for the WEB Viewer to display properly. 9. For IE11, the IP address of the camera should be added to the Compatibility View Settings (Tools>Compatibility View Settings) This document contains confidential and proprietary information of Weldex Corporation.

  • Page 21: Web Viewer Login

    3. After a successful login, the WEB Viewer screen will be displayed in your web browser. Note It is highly recommended that the [admin] account’s password be changed for security reasons. This document contains confidential and proprietary information of Weldex Corporation.

  • Page 22: Live View Functions

    Saves Live View Images to the camera’s internal SDHC Card. Sends PC MIC audio to the camera (used in Two-Way Audio). Captures the Live View image to the connected PC. This document contains confidential and proprietary information of Weldex Corporation.
  • Page 23 Flashes when alarm sensor-in is active. ⑩ Status Icons Flashes when alarm-out is active. Note WDP-4602MXV does not support Pan/Tilt Control, Focus Control, Zoom Control, ⑥ ⑦ ⑧ ⑨ Preset Control functions This document contains confidential and proprietary information of Weldex Corporation.

  • Page 24: Video Profile

    The selection can be limited depending on the resolution you choose. Ex) If Stream1 is set to 1920x1080, Stream2 will be limited to 1280x1024 or lower Frames per second. Frame Rate Select between 1~30 fps . This document contains confidential and proprietary information of Weldex Corporation.

  • Page 25: Video Setup

    Mirror/Flip the streaming output. Live Mirror Options: OFF, HORIZONTAL, VERTICAL, HORIZONTAL+VERTICAL On-Screen-Display that will be embedded to the streaming. Date/Time and custom text up to 20 characters can be embedded. This document contains confidential and proprietary information of Weldex Corporation.

  • Page 26: Audio Setup

    Note WDP-4602MXV does not support the local recording storage. G.711 will not save audio to the local recording. Improper gain values can cause low quality sound or howling sound effects. This document contains confidential and proprietary information of Weldex Corporation.

  • Page 27: Camera Setup

    2DNR – 2 Digital Noise Reduction Enable/Disable 2DNR. 2DNR applies NR to individual frames. 3DNR – 3 Digital Noise Reduction Enable/Disable 3DNR. 3DNR compares multiple frames to apply NR. 3DNR Level Adjust 3D NR level This document contains confidential and proprietary information of Weldex Corporation.
  • Page 28 Selectable options: OFF, BLC, HSBLC. CAMERA SETUP > Brightness Item Description Adjust brightness of the image. Brightness Selectable between 0~100. This document contains confidential and proprietary information of Weldex Corporation.
  • Page 29 BW : Always B/W. Selectable options: Auto, Color, B/W Note WDP-4602MXV relies on AGC for the auto color-B/W switching. If the AGC is turned off, auto switching will not operate. CAMERA SETUP > Gamma • Adjust contrast of the image.

  • Page 30: Tcp

    Modify Gateway in Static IP mode (Static IP mode). Displays the current DNS address (DHCP mode). Modify DNS in Static IP mode (Static IP mode). MAC address Displays the camera’s MAC address. This document contains confidential and proprietary information of Weldex Corporation.

  • Page 31: Port

    If enabled, username and password is required when connecting through RTSP protocol. Enable/Disable Auto port forwarding. Auto port forwarding If enabled, the connected router can automatically setup port forwarding (the router should support this function). This document contains confidential and proprietary information of Weldex Corporation.

  • Page 32: Snmp

    Enter the message recipient IP address. Enter the recipient Trap Community name. Trap Community Default value: ‘public’. Enable SNMP v3 Enable/Disable SNMP Version 3. User Password Enter the password for SNMP Version 3. This document contains confidential and proprietary information of Weldex Corporation.

  • Page 33: Ddns

    Enter the registered domain name for the DDNS. Update interval Enter the IP address update interval. Note Please refer to the DDNS service provider for more details on how to set up DDNS. This document contains confidential and proprietary information of Weldex Corporation.

  • Page 34: Https

    Select the CA file for the certificate. Once you have selected the required certificate files, click [INSTALL] INSTALL to install the certificate. DELETE Click on the [DELETE] button to remove the certificate. This document contains confidential and proprietary information of Weldex Corporation.

  • Page 35: Ip Filter

    Adds the IP address to the List. Select an IP address from the list using your mouse and click Delete Delete to remove the IP address. Apply Click to apply changes. This document contains confidential and proprietary information of Weldex Corporation.

  • Page 36: Upnp/Bonjour

    Enter user-friendly name for UPnP. • BONJOUR Use this page to configure Bonjour. Bonjour is Apple’s implementation of Zero configuration networking. Item Description Enable Enable/Disable Bonjour. Friendly Name Enter user-friendly name for Bonjour This document contains confidential and proprietary information of Weldex Corporation.

  • Page 37: Ftp

    Enter FTP server’s IP address and port number. URL / Port Default value: ‘192.168.0.1’/‘21’. Enter FTP server’s login ID. Password Enter FTP server’s login password. Upload path Specify path for the upload files. This document contains confidential and proprietary information of Weldex Corporation.

  • Page 38: Smtp

    Enter SMTP login password. Send to Enter the ‘Send to’ E-mail (recipient) address. Enter cc address. Multiple addresses can be entered using “,” separator. From Enter the ‘From’ E-mail (sender) address. This document contains confidential and proprietary information of Weldex Corporation.

  • Page 39: Schedule

    • Configure schedule expiration date using the calendar. Starting date is the current date. SCHEDULE > ON SCHEDULE BEHAVIOR Item Description Upload via FTP server Enable/Disable FTP upload by schedule. This document contains confidential and proprietary information of Weldex Corporation.

  • Page 40: Motion Detection

    • Click on [Hide Grid] to remove the grid (vice-versa). • Click on [Clear all] to deselect all motion detection areas. • Click on [Set all] to select all motion detection areas. This document contains confidential and proprietary information of Weldex Corporation.
  • Page 41 In Internet Explorer web browser motion detection setup page image is 1 frame per second. In Safari, Chrome web browsers, the motion detection setup page image frame rate is normal. This document contains confidential and proprietary information of Weldex Corporation.

  • Page 42: Sensor

    Outputs alarm signal for the selected duration. Alarm output Selectable values: OFF, 10s, 30s, 1m, 5m, 10m. Outputs alarm sound for the selected duration. Play alarm sound Selectable values: OFF, 10s, 30s, 1m, 5m, 10m. This document contains confidential and proprietary information of Weldex Corporation.

  • Page 43: Network Unlinked

    Outputs alarm signal for the selected duration. Alarm output Selectable values: OFF, 10s, 30s, 1m, 5m, 10m. Outputs alarm sound for the selected duration. Play alarm sound Selectable values: OFF, 10s, 30s, 1m, 5m, 10m. This document contains confidential and proprietary information of Weldex Corporation.

  • Page 44: Information

    • Use this section to enter Device Name, Location. Device name will be displayed in “IP Scan Tool”. INFORMATION > NETWORK • Displays current IP address and various network protocol information. This document contains confidential and proprietary information of Weldex Corporation.

  • Page 45: User

    Viewer : Live View Area Only. Registers the newly created user. Delete an existing user. Delete [admin] account cannot be deleted. Edit Change an existing user’s password. Note Only Administrators can edit USER information. This document contains confidential and proprietary information of Weldex Corporation.

  • Page 46: Date/Time

    Date Manually enter date. – (Manual mode only). Time Manually enter time. – (Manual mode only). DATE / TIME > FORMAT • Select the desired display format for the date/time. This document contains confidential and proprietary information of Weldex Corporation.

  • Page 47: Maintenance

    2. Click on the [UPGRADE] button to start the upgrade process. 3. If a pop-up message appears, click continue. Note Do not close the Web browser during the upgrade process. This document contains confidential and proprietary information of Weldex Corporation.
  • Page 48 FACTORY DEFAULT Item Description Restores to the factory default settings. Set factory default The device will reboot after a factory default. Reboot Reboot the device by clicking on the [REBOOT] button. This document contains confidential and proprietary information of Weldex Corporation.

  • Page 49: Log

    Moves to the previous day from the current date on display. NEXT DAY Moves to the next day from the current date on display. Refresh Refreshes the log display. Delete log Deletes all log entries. This document contains confidential and proprietary information of Weldex Corporation.

  • Page 50: Troubleshooting

     Check for a proper network connection. IP Scan Tool cannot find the  Disable the PC’s firewall or add IP Scan Tool to the exceptions network camera list. This document contains confidential and proprietary information of Weldex Corporation.

Table of Contents