Snmp - Weldex WDP-4602MXV Owner's Instructions Manual

Configuration
-
NETWORK

• SNMP

Use this page to configure SNMP protocol. SNMP is an internet standard protocol for managing devices
on IP networks. SNMP exposes management data in the form of variables on the managed systems.
Item
Enable SNMP Agent
Enable SNMP v1
Enable SNMP v2c
Read Community
Write Community
Enable Traps for SNMP v1/v2c
Trap Receiver
Trap Community
Enable SNMP v3
User Password
This document contains confidential and proprietary information of Weldex Corporation.
Enable/Disable SNMP Agent.
Enable/Disable SNMP Version 1.
Enable/Disable SNMP Version 2.
Configure Read Community to access SNMP information.
Default value: 'public'.
Configure Write Community to access SNMP information.
Default value: 'write'.
Enable/Disable SNMP Trap. SNMP Trap transmits critical Event &
Status information. The camera can transmit the following: Power
On, IP settings change, SNMP Enable/Disable.
Enter the message recipient IP address.
Enter the recipient Trap Community name.
Default value: 'public'.
Enable/Disable SNMP Version 3.
Enter the password for SNMP Version 3.
Description
WEB Viewer
32