Weldex WDP-4602MXV Owner's Instructions Manual page 18

IP Scan Tool
Item
⑥ Device ID
⑦ IP Address
⑧ MAC Address
⑨ Model Name
⑩ Firmware Version
Configuring Network Settings Using IP Scan Tool
Run 'IPScan.exe' executable file and click [Search]. Network connected Weldex cameras will be listed
in the window.
1. Select the camera to be configured by
clicking on your mouse.
2. Click on the [IP Setup] button to
access the IP setup window for the
selected camera.
3. You will be prompted to enter the
admin's password
Note
Default admin password is
[admin]
4. Make the desired changes to the IP
settings and click [Setup] to save
changes.
Note
MAC Address cannot be changed
This document contains confidential and proprietary information of Weldex Corporation.
Displays device ID of the camera.
Displays IP address of the camera.
Displays MAC address of the camera.
Displays model number of the camera.
Displays firmware version of the camera.
NETWORK INSTALLATION & SETUP
Function
18