Disassembling
Precautions before installation
Ensure you read out the following instructions before installing the camera:
• Select an installation site (wall) that can endure at least 5 times of the camera weight.
• Stuck-in or peeled-off cables can cause damage to the product or a fire.
• For safety purposes, keep anyone else away from the installation site. And put aside personal
belongings from the site, just in case.
Disassembling
1. Using the screw driver, loosen 4 screws by
turning
top plate
remove the
window acryl
2. Using the screw driver, loosen 4 screws by
turning them counterclockwise for
board.
3. Using the screw driver, loosen 4 screws by
turning them counterclockwise for
board.
4. Disassemble the
This document contains confidential and proprietary information of Weldex Corporation.
counterclockwise and
cover.
Main
Camera
IP main harness
cables.
INSTALLATION
11