Table of Contents
Advertisement
Configuration
-
NETWORK
• PORT
Use this page to configure network ports.
It might take up to 20 seconds for the changes to take effect. Reconnection is automatic.
Item
HTTP
HTTPS
RTSP
RTSP Authentication
Auto port forwarding
This document contains confidential and proprietary information of Weldex Corporation.
Configure HTTP port. This port is used for the web browser.
Default value: '80'. This value should be either '80' or greater than
'1024'.
Configure HTTPS port. This port is used for the web browser.
Default value: 443. This value should be either '443' or greater than
'1024'.
RTSP port image transmission.
Default value:
554~558
554
: H.264 Streaming.
555
: MJPEG Streaming.
556~558
: Reserved.
Specify the starting port number (in the above case:554), and the
next consecutive port numbers will be selected automatically.
H.264 rtsp URL: rtsp://ip_address:port/wdx/media/stream.h264
MJPEG rtsp URL: rtsp://ip_address:port/wdx/media/stream.mjpeg
Enable/Disable RTSP Authentication.
If enabled, username and password is required when connecting
through RTSP protocol.
Enable/Disable Auto port forwarding.
If enabled, the connected router can automatically setup port
forwarding (the router should support this function).
Description
WEB Viewer
31
Hide quick links:
Advertisement
Table of Contents
