Audio Setup - Weldex WDP-4602MXV Owner's Instructions Manual

Configuration
-
AUDIO & VIDEO

• AUDIO SETUP

Use this page to view/edit audio settings.
Item
Enable Audio
Mode
Encoding
Sample Rate
Input Gain
Output Gain
File Play
Note
WDP-4602MXV does not support the local recording storage.
G.711 will not save audio to the local recording.
Improper gain values can cause low quality sound or howling sound effects.
This document contains confidential and proprietary information of Weldex Corporation.
Enable/Disable audio.
Select from the following operating modes:
MIC ONLY, SPEAKER ONLY, MIC AND SPEAKER.
Select the desired audio codec.
G.711: Use this codec for network streaming audio. This codec will
not work for local recording.
AAC-LC: Use this codec for both network streaming audio and local
recording.
Audio sampling rate. Fixed to 8 KHz.
Audio input gain value.
Selectable between 1~10.
Audio output gain value.
Selectable between 1~10.
Enable/Disable event alert sound.
Select options: ALERT SOUND1, ALERT SOUND2 .
Description
WEB Viewer
26