Installing The Camera On A Wall - Weldex WDP-4602MXV Owner's Instructions Manual

Installing the camera on a wall

Installing the camera on a wall
1. Assemble the
2. Fix the case body on the wall by using Tapping Screws (BHT M4xL16).
3. Connect ethernet and accessory cables and arrange cable running not to damage or squeeze them.
4. Pass the ethernet and power accessory cables through the hole you want to pass them when
mounting the main body on the case.
5. Assemble the
6. Fasten 4 screws
This document contains confidential and proprietary information of Weldex Corporation.
M4 tapping screw x 2(supplied)
Angle Regulator parts
Height-Strip Cover [Window Acryl].
by turning top plate clockwise.
(supplied) to the rear surface.
INSTALLATION
12