Connecting To A Monitor; Connectingtopower; Setup Menu; Main Menu - Weldex WDAC-5700C Operation Manual

12

6.2 Connecting to a Monitor

Please connect the video output terminal located on the back of the camera to the monitor.
6.3 Connecting to Power
Each model has a different power input specification.
Please check the model type and standard power requirement before connecting to power.
Digital BOX Camera Installation Guide

7.0 Setup Menu

7.1 MAIN MENU

SETUP
LENS DC

EXPOSURE

WHITE BAL ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
The menu consists of the "Main Menu" and "Sub Menu".
The main menu is 8 kinds of camera functons can
be selected.To the right of each main menu selection,
the sub-menu is displayed.
LENS
LENS : Select lens type
DC /VIDEO / MENUAL
Digital BOX Camera Installation Guide
AC Power Type (AC 24V, 500mA)
DC Power Type (DC 12V, 500mA)
7.2 EXPOSURE
SETUP
LENS DC
EXPOSURE
WHITE BAL ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT
SHUTTER : You can set to auto or manual mode.
AUTO, 1/60(50), FLK, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/5000,
1/10000, 1/100000sec
BRIGHTNESS : You can adjust brightness level.
0(dark) ~ 255 (bright) steps
AGC : You can select auto gain control level
OFF / LOW / MIDDLE / HIGH
DWDR : You can select WDR (Wide Dynamic Range) level.
DWDR : OFF / ON
LEVEL : 0~35 steps
13
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 50
----
AGC
DWDR OFF
RETURN RET