Indicators On The Device - Fujitsu ESPRIMO P5 Series Operating Manual

Operation

Indicators on the device

The indicators are on the front of the casing. Which indicators are available on your
device depends on the configuration level you have selected.
No. indicator
1 Drive indicators
2 Indicator for optional
components, e.g.
SmartCard reader
3 Power-on indicator
4 Hard disk indicator
32
Description
The indicator lights up when the CD-ROM or DVD drive of the
device is accessed. You must never under any circumstances
remove the CD/DVD while the indicator is lit.
The indicator lights up when the optional component, e.g. the
SmartCard reader, is accessed.
Warning: In the energy saving mode, the device must not be
disconnected from the mains, as this can result in a loss of data.
• Indicator is illuminated:
The device is switched on.
• The indicator flashes (depending on device type):
The device is in energy-saving mode. After being switched on
with the ON/OFF switch, the device powers up or returns to the
state it was in before it entered energy-saving mode.
• The indicator is not illuminated:
The device is switched off or disconnected from the mains. If
the device is ready for operation, it can be switched on with
the ON/OFF switch.
The indicator lights up when the hard disk drive of the device is
accessed.
1
1
2
3
4
Fujitsu