Table of Contents
Advertisement
Queue mapping to DSCP: Assign a value (0~63) to four different levels.
Queue mapping to 802.1p: Assign a value (0~7) to four different levels.
4.4.10 Port Mirroring
In order to allow Target Port to mirror Source Port and enable traffic monitoring, select the
option Port Mirroring from the Switch Management menu and then the following screen
page appears.
Source Port: Choose "Y" (enable) or "N" (disable) from the pull-down menu to enable or
disable Target Port's mirroring on the TX and RX of Source port.
Target Port: Select the preferred target port for mirroring or select Disable to turn off port
mirroring function. When enabled, the traffic flows from the selected source ports will be
copied to this target port for monitoring.
124
SIGNAMAX a.s.
Office: Vlarska 22, 627 00 Brno, CZ
T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu
Advertisement
Table of Contents
