Download Print this page

Troubleshooting - Black & Decker ALL-IN-ONE B1561 Operating Instructions & Cook Book

Automatic breadmaker
Hide thumbs


Table of Contents
How To Use Your Breadmaker
flashes as it did when setting the clock above. While
the "12" is flashing, press the "Up" or "Down" arrows
to change the "12" to "8", checking to make sure
"AM" is displayed. To set the minutes, press the
TIMER button while the hour setting is flashing. If
the hour setting has stopped flashing before the min-
utes have been set, press and hold the TIMER but-
ton. With the hour setting flashing again, immedi-
ately press the TIMER button to set the minutes.
While the "00" is flashing, the minutes can be set to
"30" using the "Up" or "Down" arrows. When the
"30" stops flashing and the current time is displayed,
the timer is set.
To start the delayed completion timer, press the
TIMER button. The completion time will flash
briefly and be replaced by the current time in the
display, and the green TIMER light will come on. If
the green light does not come on, and
"13 Hr
have set the TIMER for longer than the maximum
13 hour delay. To reset the TIMER hold the TIMER
button until the hour setting flashes, and the time
can be changed using the "Up" and "Down" arrows.
If the green light does not come on, and
"0 Hr
been set for a delayed completion time which is
shorter than the actual bake time (for example 3:50 is
the bake time for Sweet Bread). Reset the TIMER for
a longer delayed completion time.
To cancel the TIMER function, press the TIMER
button and the green light will go out.
To check the completion time while the green
TIMER light is on, press the TIMER button
twice. To check the completion time while the red
light is on, press the TIMER button once.
When the actual breadmaking operation
begins, the green "timer" light will go out, the
red "on" light will come on, and total bake time (3:50
for Sweet Bread) will appear on the display. The bake
time will count down in one minute intervals. When
the end of the countdown is reached, a beeping sig-
nal will sound and your bread is complete. The red
light will now begin flashing to show the Breadmaker
has automatically activated the 60 minute "Keep
Warm" function.
" appears on the display, you
" appears, the TIMER has


Specific questions about the breadmaker functions
and problems with ingredients or recipes are
addressed in the "Need Help?" section beginning on
pg. 33.
If there is an operational problem with the unit,
you may see a hyphen, colon, double hyphen
(- : --) message in the display window. This
means there is an operational/mechanical
malfunction. DO NOT USE THE UNIT. Unplug
the unit and contact your local service center for
repair. Call the toll-free number on the cover of
this booklet to ask for the location of the Black &
Decker service center nearest you.
If the START/RESET button is pressed and the
word "HOT" appears in the display window, it
indicates that the unit has not cooled sufficiently
after baking to use immediately again. Open the
lid, remove the Baking Pan and allow the inside
of the unit to cool. Once the unit has cooled
sufficiently, pressing the START/RESET button
will immediately start the breadmaking
For specific problems with Bread/Dough results,
see the Troubleshooting guide on the next page:

Hide quick links:


Table of Contents

  Related Manuals for Black & Decker ALL-IN-ONE B1561