Advertisement
REMOVING THE
DUST SHIELD COVER
Slide the dust shield cover out from the condenser housing
(FIG. 1). Be sure to keep it to reinstall it should you need to
transport the microscope. FIG. 2 shows the condenser
housing with the dust shield cover removed.
INSTALLING THE
PHASE SLIDER
Before inserting the Phase slider, it is recommended the iris
diaphragm lever be set to PH on the condenser.
Insert the slider into the slot on the condenser as shown in
FIG. 3 & FIG 4.
Move the slider to its position that corresponds to the phase
objective in use (i.e., 40x objective = 40x position on slider).
IMPORTANT!
Raise the condenser to its uppermost position.
Refer to the instruction manual provided with the microscope
on how to focus on a specimen.
GREEN FILTER
The included green filter can be mounted on top of the
illuminator housing.
3000-LED SLIDER PHASE CONTRAST INSTRUCTIONS
Condenser Height Adjustment Knob
FIG. 1
FIG. 2
FIG. 3
FIG. 4
Advertisement
