Point Code & Error Code - Global LP 8970 I Series Manual

IX. Point code & error code
Error
code
Motor connector connect un-properly.
ER0. 7 1.
2.
Synchronizer out of order.
3. Sewing machine locked or belt stuck by
article.
Material too thick.
4.
ER0. 12
No synchronizer when power ON.
1.
ER0.16
Safety switch out of order or connecting failed.
2.
Parameter value of 075 SFM is different to
sewing machine.
Cause
15
Description
Power shut down.
Pleases check motor or connector is normal or
abnormal.
Pleases check the synchronizer.
Pleases check sewing machine stuck or hard to
turn.
Enter no synchronizer mode automatically.
Pleases check synchronizer plug in properly or not.
Motor stop running.
Pleases check safety switch.
Pleases check parameter value of 075 SFM correct
or not.