Reassembly - MOTO GUZZI Nevada Classic 750 ie 2004 Workshop Manual

CYCLE PARTS
7.1.8.

REASSEMBLY

WARNING
Before reassembly all components must be
carefully washed and dried with compressed
air.
•
Perform all the necessary overhaul procedures
•
Insert the plunger assy. into the stanchion tube
complete with counter-spring and ring.
•
Check that the slider is equipped with the upper guide
ring.
•
Fit the lower sliding bushing in the seat on the
stanchion.
• Now reassemble the stanchion tube and slider.
7 - 16
NEVADA 750 i.e.