Reassembly - MOTO GUZZI Nevada Classic 750 ie 2004 Workshop Manual

NEVADA 750 i.e.
6.2.3.

REASSEMBLY

• If you need to renew the bevel pinion then you must
also renew the
transmission case. The pinion and gear in the set must
be stamped with the same identification number.
•
Use the specific punch (19926400) to drive the outer
race of the taper roller bearings into the bevel pinion
housing.
• Fit the clearance washer.
bevel gear mounted on the
TRANSMISSION
6 - 17