TRANSMISSION
6.4.3.
REASSEMBLY
•
Screw in the pin on the right-hand side until it protrudes
from the swing arm sufficiently to hold the shim.
•
Insert the swing arm into the transmission case cover.
•
Tighten the left-hand pin fully down until the shim on
the right-hand side is located against the bearing fitted
to the transmission case cover.
•
Snug the pin on the right-hand side without tightening.
•
Articulate the swing arm to ensure that it moves freely
without play.
•
Fit the nuts onto the studs and tighten them fully down.
6 - 38
NEVADA 750 i.e.