Warnings; Additional Indications; Correction Procedures; Factory Settings Restoration - ABB Relion 630 Series Operation Manual

Section 7
Troubleshooting
7.2.2
7.2.3
7.3
7.3.1
7.3.2
110

Warnings

The warning message associated with the fault is found in the internal event list in the
LHMI menu Main menu/Monitoring/Internal events. The message includes the
date, time, description and signal state for the fault. The current status of the internal
fault signals can also be checked via the LHMI in Main menu/Monitoring/IED
status.
When a fault appears, record the fault indication message and state it when ordering
service.
Table 23: Warning indications
Warning indication
Warning
IEC 61850 Error

Additional indications

The additional indication messages do not activate internal fault or warning.
The messages are listed in the LHMI menu under the event list. The signal status data
is found under the IED status and in the internal event list.
Table 24: Additional indications
Warning indication
Time Synch Error
BATTERY1 Error
Settings Changed
Setting Groups Changed

Correction procedures

Factory settings restoration

In case of configuration data loss or error that prevents the IED from working
properly, the configuration can be restored to the original factory state. All default
settings and configuration files stored in the factory are restored.
For further information on restoring factory settings, contact customer support.

Changing and setting the password

The password can only be set with PCM600.
Additional information
IEC 61850 has not succeeded in some actions such as reading the
configuration file, startup etc.
Additional information
Source of the time synchronization is lost or time system has made a
time reset.
Auxiliary power is disconnected.
Settings have been changed.
Setting group has been changed.
PML630/Compact Load-Shedding Solution
1MRS757183 F
Operation Manual