1MRS757183 F
PML630/Compact Load-Shedding Solution
Operation Manual
GUID-1581FB09-BD83-4872-9F72-5885939D897F V2 EN
Figure 91:
Load shed core function mode
2.
Select TestMode On from the local HMI to set the IED into test mode.
GUID-C4239A54-7F36-43E0-8F18-A3F31EAD1D03 V2 EN
Figure 92:
Test mode
All the load-shedding functions are automatically set to Blocked mode, which is
the TEST+BLOCKED mode of the IED. In Test\Function test modes\Power
Management\LSCACLS this is seen as Blocked = Yes.
Section 6
Operating procedures
99