ABB Relion 630 Series Operation Manual page 42

Section 4
Using the HMI
34
•
Activate the digit to be entered with
•
Enter the character with
Upper and lower case letters are also found by scrolling with the vertical arrows.
GUID-A6C9646B-1409-4EDE-8BEC-CD2E7E948A87 V2 EN
Figure 14: Entering the password
Passwords are case sensitive.
Only characters A - Z, a - z and 0 - 9 should be used in user names
and passwords.
4.
Press to confirm the logon or
If the logon fails, a message is displayed on the display.
GUID-DF0BA02F-FE04-4B23-A7EB-F05E806578A5 V2 EN
Figure 15: Error message indicating an incorrect password
The logon dialog will open if the attempted operation requires another
level of user rights.
Once a user is created and written into the IED, logon is possible with
the password assigned in the tool. If there is no user created, an attempt
to log on causes the display to show a corresponding message.
GUID-A2426EB4-59F6-4EB2-A7D7-37D7F49341B7 V1 EN
Figure 16:
and
and .
to cancel the procedure.
No user defined
PML630/Compact Load-Shedding Solution
1MRS757183 F
.
Operation Manual