Using The Single-Line Diagram - ABB Relion 630 Series Operation Manual

Section 4
Using the HMI
4.1.9
40
GUID-ED0CC912-ED59-4270-A3B8-9818FFE300FD V5 EN
Figure 22: Function button panel
2. Press the wanted function button.
• Press the wanted function button to jump to a certain menu item.
The menu opens immediately upon pressing the button.
• Press the wanted function button for at least 0.5 s to initiate a control
signal. The action is taken once.
To repeat the action, press the button again. If the button is pressed less that
0.5 s, no action is taken.
3.
Press to close the function button panel.
The panel is also closed after pressing a function button configured for a menu
shortcut.
The function buttons are configured with PCM600.
For more information, see PCM600 documentation.

Using the single-line diagram

The single-line diagram is created with PCM600.
1. Select Main menu/Control/Single line diagram.
The single-line diagram view is displayed.
1MRS757183 F
PML630/Compact Load-Shedding Solution
Operation Manual