Coolaroo AutoSun Custom Made Instruction Manual page 11

CHANGE DIRECTION OF BRACKET
ANCHOR POINTS (IF DESIRED)
STEP 1
Remove screw end cap (Fig 1).
STEP 2
Locate Philips head screw inside thread. Use a Philips head screw
driver to remove screw and thread (Fig 2).
STEP 3
Reattach in the desired direction. Replace end cap (Fig 3).
STEP 4
Now follow instructions from Blind Assembly (page 5)
and Wire Guide System Assembly (page 6) to install your blind and
wire guide.
Fig 1
Fig 2
Fig 3
11