Table of Contents
Advertisement
Action
Activate the bridge on the 3
zones
Deactivate the bridge on the 3
zones
The front zone has priority over the rear zone during the bridge function:
the bridge keeps the power level of the front zone just before the activation of the bridge function.
Auto Bridge Function
When a large pan is detected on two bridgeable zones, the bridge indicator flashes on the screen.
Choose the power level to validate the bridge, if no power level is selected within 10 seconds the
bridge is disabled.
Control Panel
press on the middle zone selection
key for 4 seconds
press on the middle zone selection
key for 4 seconds
25
Display
Advertisement
Table of Contents
