Product Description; Use And Application; Scope Of Delivery; Accessories - Pepperl+Fuchs PMI14V-F112-IO Series Manual

PMI14V-F112-...-IO-...

Product Description

4 Product Description
4.1

Use and Application

The PMI14V-F112-...-IO-... inductive positioning system with IO-Link is designed to detect
minimal changes in position in a noncontact process. The measurements are performed within
a range of 14 mm with a high level of accuracy. As a general rule, position detection is achieved
by attaching a damping element.
A typical area of application for the PMI14V-F112-...-IO-... is monitoring spindles in clamping
systems.
What is IO-Link?
IO-Link is a new dimension of communication of and with sensors. The possibility of making
the intelligence that is already integrated in each and every sensor fully available to users
opens up new possibilities for automation. The use of IO-Link produces positive effects for all
fields of application in factory automation. The technology offers particular benefits with regard
to servicing (troubleshooting, maintenance, and device replacement), during the
commissioning process (cloning, identification, configuration, and localization) and during
operation (job changeover, continuous parameter monitoring, and online diagnostics).
Reducing the variety of interfaces offers users significant savings potential. This variety of
interfaces often results from having analog sensor inputs and the complex installation required
in this case.
4.2

Scope of Delivery

PMI14V-F112-...-IO-...
Quick reference guide
The device description (IODD) can be found in the download area of the Pepperl+Fuchs
website at www.pepperl-fuchs.com and in the product information for the PMI14V-F112-...-
IO-....
4.3

Accessories

Various accessories are available.
4.3.1

Damping Element

We recommend using the BT-F90-W damping element.
BT-F90-W
Using Your Own Damping Element
In principle, it is possible to use your own damping element. The damping element must have
the following properties to be able to make use of the sensor's specified accuracy:
Material: construction steel such as S235JR+AR (previously St37-2)
Dimensions (L x W x H): ≥ 18 mm x 8 mm x ≥ 4 mm
Material: ST37 steel
8
18
28
10
ø 4,2
9