Selecting A Memory - Sony DKC-ST5 Operating Instructions Manual

Selecting a Memory

"Increment on" mode
There are two modes in which you can select a memory: "increment on"
mode, and "increment off" mode.
In "increment on" mode, each time you press the release button to capture
an image in memory, the memory selection for the next image is
incremented automatically (1, 2, 3, ... 9).
The following shows how the memory selection changes in "increment
on" mode.
Memory status indication
1
1
2
To select the "increment on" mode
From the main menu, select the CAMERA menu, then set the
"INCREMENT" item to "ON" (this is the factory default setting).
For details of menu operations, see Chapter 4.
When using the system initially, memory 1 is
selected for image capture. (The white
squares indicate that the memories do not hold
images.)
Press release button...
An image is captured in memory 1, and after a
transient review, the system returns to the live
monitor mode. (The film icon indicates a
memory which holds an image.)
Press release button again...
An image is captured in memory 2, and after a
transient review, the system again returns to the
live monitor mode. Pressing the release button
once again will capture an image to memory 3.
Chapter 2 Operation
37