Adjusting The Iris - Sony DKC-ST5 Operating Instructions Manual

Adjusting the Iris

30
Chapter 2 Operation
Use the following procedure to adjust the iris setting (f-stop) at the instant
that a still image is captured to memory.
Note
For normal purposes select F5.60 (factory default setting).
1
1
Set the lens to the automatic iris mode.
2
If in the memory monitor mode, press the LIVE/MEMORY button to
switch to the live mode.
The "LIVE" mode indication appears on the monitor screen.
3
If the status display mode is off, press the CHARACTER ON/OFF
button to switch on the status display.
The f-stop setting appears on the monitor screen.
4
• To increase the numerical value of the f-stop (i.e. to stop down the
iris for still image capture), press the IRIS + button.
• To decrease the numerical value of the f-stop (i.e. to open up the iris
for still image capture), press the IRIS – button.
Note
Changing this setting does not affect the iris during output of live
images. The f-stop setting only takes effect when the release button is
next pressed.
STDBY USER IRIS
+
4
2 LIVE/MEMORY E-ZOOM
--
MEMORY FOCUS ZOOM
+
T
FAR
--
W
NEAR
MENU ENTER
FRAME
WB(STILL)
ON/OFF
3
CHARACTER
WB(LIVE)
BB ON/OFF