Powering On And Off - Sony DKC-ST5 Operating Instructions Manual

Powering On and Off

Powering On
......................................................................................................................................................................................
1) Power Macintosh is a trademark of Apple Computer, Inc.
Use the following procedure to power on.
Notes
• When using the system for the first time, before powering on be sure to
set the DIP switches appropriately.
• When you are using a Power Macintosh
Computer, Inc., execute Step 3 before Step 2.
For details of the settings of the DIP switches, see page 50.
1
Power on the monitor, printer, and other peripheral devices.
For details, refer to the user documentation provided with the peripheral
devices.
2
Power on the digital processor (press in the POWER switch on the
front panel).
If the "BEEP" item in the OTHERS menu is set to "ON" (the factory
default setting), then the digital processor emits a double beep about
five seconds after it is powered on, indicating that it is ready for
operation.
For details of the menus, see Chapter 4.
When the digital processor is ready for operation, the system
automatically switches to the live monitor mode, and the mode
indication "LIVE" is displayed on the monitor screen.
For details of the live monitor mode, see the section "Live and Memory
Monitor Modes" on the next page.
For details of the operating mode indication, see the section "Status
Indications" on page 23.
3
If you are using a computer, power on the computer.
For details, refer to the user documentation provided with the computer.
Note
If you power on the computer before the digital processor is ready for
operation (after the double beep), the computer may not start up
correctly.
1)
computer from Apple
Chapter 2 Operation
21