Figure 41
1. Height-of-cut adjusters
2. Adjuster capscrew
3. Cut-height scale
4.
Working at 1 of the deck rollers, turn the adjuster
capscrew to raise or lower the mower until the
pointer aligns with the grass cut height that you
determined in step 2.
5.
Tighten the locknuts for 2 height-of-cut adjusters.
6.
Repeat steps
4
and
adjusters at the other roller.
7.
Repeat steps
3
through
4. Locknut
5. Pointer
6. Rollers
5
for the height-of-cut
6
for the other decks.
Making a Sharp Turn
1.
Shift the tow vehicle to
2.
Driving the machine slowly, steer to make the
sharp turn.
Important:
tow vehicle to mower angle.
g250931
75° Maximum Tow Vehicle to Mower Angle
3.
As you turn, check to ensure clearance between
the tire of the tow vehicle and the parts of the
mower
(Figure
g250930
Note:
If the tire is too close to the mower, turn
more gradually.
25
or
LOW GEAR
Do not exceed the 75° maximum
Figure 42
43).
Figure 43
.
LOW RANGE
g264251
g264252