Toro Groundsmaster 1200 Series Operator's Manual page 31

Greasing the Drive Shaft
Guard-Slip Joints
Service Interval: Every 50 hours
Apply the specified grease to the 6 grease fittings for
the drive shaft guard-slip joints as shown in
Figure 51
Greasing the Lift Arms, Hydraulic
Cylinders, Latches, and Impact
Struts
Service Interval: Every 50 hours (also, lubricate
the mower immediately after every
washing).
•
Apply the specified grease to the lift arms,
hydraulic cylinders, and impact struts of the left
and right mower decks
Figure
g264214
g264213
(Figure 52).
51.
Left or Right Mower Deck
1. Outboard
•
Apply grease the lift arms and hydraulic cylinders,
and impact struts of the center mower deck
53).
1. Back of the mower
Greasing the Spindles
Service Interval: Every 50 hours
Apply the specified grease to the grease fitting at the
3 spindles at each mower deck
Left deck shown. Right and center decks are similar.
31
Figure 52
Figure 53
Center Mower Deck
(Figure 53).
Figure 54
g251060
(Figure
g251059
g251062