Setup; Applying The Entanglement Decal - Toro Groundsmaster 1200 Series Operator's Manual

Setup

Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
6
7
Media and Additional Parts
Description
Operator's Manual
1
Applying the Entanglement
Decal
CE Mowers
Parts needed for this procedure:
4 CE entanglement decal
Procedure
Important:
This procedure is required for all CE
countries and anywhere English is not commonly
spoken.
1. Rotate the shaft guard to access the existing
entanglement decal
Description
CE entanglement decal
Knob
No parts required
No parts required
No parts required
PTO-drive shaft half (forward)
Deck-lock rope
(Figure 3).
Qty.
4
6
–
–
–
1
1
Qty.
Read this manual before using the pull behind rotary
1
mower.
6
Use
Apply the entanglement decal—CE
mowers
Install the deck cover knobs.
Adjust the drawbar position of the
machine.
Adjust the tow bar of the mower
Convert the pin tow bar to a pintle tow
bar.
Assembling the PTO-drive shaft.
Route the deck latch rope at the mower.
Use