Figure 84
1. Socket-head screw
2. Height-of-cut adjuster
(rear roller)
3. 2 inch mark (decal)
7.
Torque the 4 nuts that secure the 4 height-of-cut
adjuster blocks
(Figure 82
front and rear rollers to 322 to 396 N∙m (238 to
292 ft-lb).
g256116
4. Pointer
5. Nut
and
Figure
84) for the
Storage
Storing the Machine
At the end of the mowing season or when the mower is
stored for an extended period, carry out the following
preventative maintenance:
1.
Park the machine on a level surface; engage the
parking brake; shut off the engine; remove the
key; and wait for all movement to stop before
leaving the machine.
2.
Clean off any dirt or grease that may have
accumulated on the machine or any of the
moving parts.
3.
Lubricate all grease fittings.
4.
Touch up paint any other scratches on the
painted surfaces.
5.
Replace any missing or damaged decals.
6.
When possible, store the mower inside a
dry, secure building. If inside storage is not
available, cover the machine with a heavy sheet
or tarpaulin and secure it tightly.
43