Toro Groundsmaster 1200 Series Operator's Manual page 30

Greasing the Telescoping
Drive-Shaft Joints
Service Interval: Every 50 hours
1. Partially extend the PTO drive shaft to access
the grease fitting near the middle of the inboard
drive-shaft guard
Figure 49
2. Apply grease to the 4 grease fittings for the
telescoping drive-shaft joints as shown in
49.
Greasing the Driveshaft U-Joints
Service Interval: Every 50 hours
Apply the specified grease to the 7 fitting for the drive
shaft U-joints as shown in
(Figure 49).
Figure 50.
g264299
g264298
Figure
30
Figure 50
g255328
g255327