Danfoss VLT Midi Drive FC 280 Operating Instructions Manual page 26

Commissioning
5.3.4 Main Menu on LCP
The Main Menu gives access to all parameters.
1. To enter Main Menu, press [Menu] until the
indicator in the display is placed above Main
Menu.
▲
2.
[ ] [
3. Press [OK] to select a parameter group.
▲
4.
[ ] [
5 5
specific group.
5. Press [OK] to select the parameter.
6.
[►] and [
7. Press [OK] to accept the value.
8. To exit, press either [Back] twice (or 3 times for
array parameters) to enter Main Menu, or press
[Menu] once to enter Status.
See Illustration 5.5, Illustration 5.6, and Illustration 5.7 for the
principles of changing the value of continuous,
enumerated, and array parameters, respectively. The
actions in the illustrations are described in Table 5.5,
Table 5.6, and Table 5.7.
24
▼
]: Browse through the parameter groups.
▼
]: Browse through the parameters in the
▲ ▼
] [ ]: Set/change the parameter value.
Danfoss A/S © 11/2015 All rights reserved.
®
VLT Midi Drive FC 280
OK
2 x
OK
+
OK
Illustration 5.5 Main Menu Interactions - Continuous
Parameters
Setup 1
1
Setup 1
2
Setup 1
3
Setup 1
4
Setup 1
5
Setup 1
6
Setup 1
7
Setup 1
8
Setup 1
12
11
10
9
OK
MG07A102